/**
 * GO switches from boot to run mode.
 */
`default_nettype none
module GO(
	input clk,
	input load,
	input [15:0] pc,
	input [15:0] sram_addr,
	output [15:0] SRAM_ADDR,
	input [15:0] sram_data,
	input [15:0] ROM_data,
	output [15:0] instruction
);
	
	// Put your code here:
	reg active=0;
	always @(posedge clk) begin
			if (load) begin
				active = 1;
			end
		end
	
	assign instruction = (active) ? sram_data : ROM_data;
	assign SRAM_ADDR = (active) ? pc : sram_addr;
endmodule